DRILLMASTER
E-mail: drillto@hddmaster.com WhatsApp: +8618975143242

XZ420E 2019/2020

Brand:
XCMG
Model:
XZ420E
Year of manufacture:
2020
Used hour:
2400 hours
Request Quote

Parameters

Brand
XCMG
Model
XZ420E
Year of manufacture
2020
Used hour
2400 hours

 

100 drill pipes, 50 of which were purchased in 2025; 3-8 reamer, guide drill bit, and power divider.

 

There is also a 2019 XZ420E, with over 4100 hours of operating time, equipped with 80 drill pipes, reamers in sizes 300–700, a guide bit and a swivel.

XZ420E 2019

 

XZ420E 2019

Related Products

2022 XZ360E

2022 XZ360E

  There are two 2022 XCMG 360E HDD rigs.  
2020 ZT90-135

2020 ZT90-135

60 drill pipes with a diameter of 114 mm; reamers (400, 600, 800); pilot drill bits
2023 XZ320E

2023 XZ320E

Equipped with 100 drill pipes, a pilot bit, 300 mm, 400 mm, and 500 mm reamers, and a swivel.
XZ960E

XZ960E

  80 drill pipes with a diameter of 102 mm, 4/6/8 reamers, pilot bits, power dividers, and ground anchor plates.   In addition, we have another unit of the same model. This one includes approximately 80 pieces of 102 drill pipe, reamers ranging from 5 to 8 inches in diameter, as well as a pilot bit, […]

Related articles

Comparison of Two Major Guidance Technologies for Trenchless Directional Drilling: Wireless Guidance vs. Wireline Guidance

Compare Wireless Guidance vs Wireline Guidance for trenchless directional drilling. Learn technical principles, pros & cons, accuracy and application scenarios to select the right HDD guidance system for your project.

How to Correctly Select an HDD Reamer Based on Different Geological Conditions?

In horizontal directional drilling operations, the selection of a reamer directly impacts the success, efficiency, and cost of the project. Selecting the wrong tool can result in minor issues such as schedule delays and excessive equipment wear, or major problems like drill string jamming and the scrapping of the borehole. Choosing the right reamer, on […]

PDC Reamers vs. Roller Cone Reamers: How to Choose the Right Reaming Tool for HDD Trenchless Construction?

In Horizontal Directional Drilling (HDD) trenchless pipeline construction, the reaming process following the completion of the pilot bore is a critical step that determines construction efficiency, borehole quality, and the ultimate success rate of pullback. As a key piece of drilling equipment that directly interacts with the formation, the proper selection of a reamer directly impacts: […]

Guide to Selecting Horizontal Directional Drilling Rigs: How to Choose the Right Model Based on Project Requirements

In the field of trenchless construction, horizontal directional drilling has become the mainstream method for laying underground pipelines. However, faced with the vast array of models on the market—ranging from small 16-metric-ton units to large rigs weighing several thousand metric tons—many contractors often find themselves in a dilemma: “If I choose a larger model, I worry about wasting […]