DRILLMASTER
E-mail: drillto@hddmaster.com WhatsApp: +8618975143242

XCMG XZ320D

Brand: XCMG
Model: XZ320D
Year of manufacture: 2019
Used hour: 4187h
Parts list: 100 pcs 73mm×3 m drill pipe, 1 each of 345678 reamer, 1 set pilot drill bits, 1 transfer case

Request Quote

Introduction

Brand: XCMG

Model: XZ320D

Year of manufacture: 2019

Used hour: 4187h

Parts list: 100 pcs 73mm×3 m drill pipe, 1 each of 345678 reamer, 1 set pilot drill bits, 1 transfer case

Dscription

High horsepower engine ensures that the drilling rig can complete pipeline laying operations under various complex geological conditions.
Dual speed power head: operates at low speed during drilling and towing to ensure smooth construction; When the drill pipe is unloaded and shuttled back and forth, the power head can accelerate sliding, reduce auxiliary time, and improve work efficiency.

Related Products

2022 XZ360E

2022 XZ360E

  There are two 2022 XCMG 360E HDD rigs.  
2023 XZ320E

2023 XZ320E

Equipped with 100 drill pipes, a pilot bit, 300 mm, 400 mm, and 500 mm reamers, and a swivel.
XZ960E

XZ960E

  80 drill pipes with a diameter of 102 mm, 4/6/8 reamers, pilot bits, power dividers, and ground anchor plates.   In addition, we have another unit of the same model. This one includes approximately 80 pieces of 102 drill pipe, reamers ranging from 5 to 8 inches in diameter, as well as a pilot bit, […]
2020 XZ420

2020 XZ420

Equipped with 100 drill pipes with a diameter of 83 mm, a pilot bit, 300 mm, 400 mm, and 500 mm reamers, a swivel.

Related articles

Comparison of Two Major Guidance Technologies for Trenchless Directional Drilling: Wireless Guidance vs. Wireline Guidance

Compare Wireless Guidance vs Wireline Guidance for trenchless directional drilling. Learn technical principles, pros & cons, accuracy and application scenarios to select the right HDD guidance system for your project.

How to Correctly Select an HDD Reamer Based on Different Geological Conditions?

In horizontal directional drilling operations, the selection of a reamer directly impacts the success, efficiency, and cost of the project. Selecting the wrong tool can result in minor issues such as schedule delays and excessive equipment wear, or major problems like drill string jamming and the scrapping of the borehole. Choosing the right reamer, on […]

PDC Reamers vs. Roller Cone Reamers: How to Choose the Right Reaming Tool for HDD Trenchless Construction?

In Horizontal Directional Drilling (HDD) trenchless pipeline construction, the reaming process following the completion of the pilot bore is a critical step that determines construction efficiency, borehole quality, and the ultimate success rate of pullback. As a key piece of drilling equipment that directly interacts with the formation, the proper selection of a reamer directly impacts: […]

Guide to Selecting Horizontal Directional Drilling Rigs: How to Choose the Right Model Based on Project Requirements

In the field of trenchless construction, horizontal directional drilling has become the mainstream method for laying underground pipelines. However, faced with the vast array of models on the market—ranging from small 16-metric-ton units to large rigs weighing several thousand metric tons—many contractors often find themselves in a dilemma: “If I choose a larger model, I worry about wasting […]