DRILLMASTER
E-mail: drillto@hddmaster.com WhatsApp: +8618975143242

2020 ZT90-135

Brand:
Drillto
Model:
ZT90-135
Year of manufacture:
2020
Used hour:
1240 hours
Request Quote

Parameters

Brand
Drillto
Model
ZT90-135
Year of manufacture
2020
Used hour
1240 hours

60 drill pipes with a diameter of 114 mm; reamers (400, 600, 800); pilot drill bits

Related Products

2022 XZ360E

2022 XZ360E

  There are two 2022 XCMG 360E HDD rigs.  
2023 XZ320E

2023 XZ320E

Equipped with 100 drill pipes, a pilot bit, 300 mm, 400 mm, and 500 mm reamers, and a swivel.
XZ960E

XZ960E

  80 drill pipes with a diameter of 102 mm, 4/6/8 reamers, pilot bits, power dividers, and ground anchor plates.   In addition, we have another unit of the same model. This one includes approximately 80 pieces of 102 drill pipe, reamers ranging from 5 to 8 inches in diameter, as well as a pilot bit, […]
2022 ZT-32

2022 ZT-32

80 drill pipes with a diameter of 73 mm, a pilot drill bit, a swivel, and reamers ranging from 200mm to 400mm.

Related articles

PDC Reamers vs. Roller Cone Reamers: How to Choose the Right Reaming Tool for HDD Trenchless Construction?

In Horizontal Directional Drilling (HDD) trenchless pipeline construction, the reaming process following the completion of the pilot bore is a critical step that determines construction efficiency, borehole quality, and the ultimate success rate of pullback. As a key piece of drilling equipment that directly interacts with the formation, the proper selection of a reamer directly impacts: […]

Guide to Selecting Horizontal Directional Drilling Rigs: How to Choose the Right Model Based on Project Requirements

In the field of trenchless construction, horizontal directional drilling has become the mainstream method for laying underground pipelines. However, faced with the vast array of models on the market—ranging from small 16-metric-ton units to large rigs weighing several thousand metric tons—many contractors often find themselves in a dilemma: “If I choose a larger model, I worry about wasting […]

What is Horizontal Directional Drilling? A Comprehensive Guide to Trenchless Technology

What is Horizontal Directional Drilling (HDD)? Horizontal Directional Drilling (HDD) is a trenchless underground pipeline laying technology. Simply put, it involves drilling a small hole in the ground without excavating the surface, allowing the drill bit to “traverse” underground along a pre-designed route, and finally dragging the pipes, cables, etc., from one end to the other. […]

Comprehensive Analysis of the Advantages of Drillmaster Pit-Launch Directional Drills in Trenchless Construction

Against the backdrop of increasingly dense urban underground pipe networks, trenchless construction has become the mainstream option for municipal engineering projects. Among various trenchless construction equipment, the Pit-Launch Directional Drill manufactured has earned growing popularity among construction contractors thanks to its unique technical strengths and outstanding on-site performance. What is the Drillmaster Pit-Launch Directional Drill? […]