Hydrostatic Pipe Crusher S-80
The S-80 static pressure pipe crusher consists of a main machine, a hydraulic system, a quick-release rod and a flexible guide rod, and several expanders of different diameters. The machine has a compact structure, can crush old pipes while laying new PE, steel pipes, and cement pipes, and has the characteristics of high efficiency and simple operation. It only requires a small working pit to operate.
Introduction
The S-80 static pressure pipe crusher consists of a main machine, a hydraulic system, a quick-release rod and a flexible guide rod, and several expanders of different diameters. The machine has a compact structure, can crush old pipes while laying new PE, steel pipes, and cement pipes, and has the characteristics of high efficiency and simple operation. It only requires a small working pit to operate.
Parameters
| Model | S80A | S125A | S190A |
| Machine Dimension(mm) | 2380*980*830 | 2800*1050*800 | 2800*1200*1000 |
| Machine Weight(kg) | 2000 | 2600 | 2900 |
| Thrust (250bar pressure)(kN) | 400 | 700 | 900 |
| Pulling (250bar pressure)(kN) | 800 | 1250 | 1900 |
| Maximum Expander Diameter(mm) | 450 | 650 | 800 |
| Maximum replacement PE pipe diameter(mm) | 90-426 | 150-550 | 250-800 |
| Engine | Diesel engine | Diesel engine | Diesel engine |
| Output Power | 75KW，2200rpm | 110KW，2200rpm | 110KW |
| Power Station Weight(kg) | 1500 | 2000 | 1830 |
| Power Station Dimension(mm) | 2600*100*1550 | 2600*100*1400 | 3000*1500*1400 |
Advantages
● New durability brought by updates
● Inestimable economic and environmental protection
● Can be replaced with new pipes such as PVC, PE, steel pipes, cement pipes of the same or larger diameter
● Applicable to sewage pipes, drainage pipes, gas, water and other pressure pipes
● The same set of equipment is suitable for a variety of different pipe diameters
● Trenchless construction, saving costs
Cases
Related Products
2016 Drillto ZT‑240
This is a used hdd machine from Drillto, model ZT‑240, originally manufactured in 2016. With over 2,600 working hours recorded. The rig comes with a substantial accessory set: 130 pieces of 140mm drill rods, a 1500L external mud motor, a 168mm mud motor, a 140mm non‑mag drill collar, a 20m³ mud tank, and a 450mm rock hole opener.
2016 Drillto ZT‑120/180
This is a used hdd rig from Drillto, model ZT‑120/180, originally manufactured in 2016. It has logged over 1,600 working hours—significantly low for its age—and is currently offered as a bare unit that has been fully refurbished to ensure reliable performance.
Drillto ZT100/150 2023
This is a used hdd machine from the Drillto, model ZT100/150, manufactured in 2023 with over 2,600 working hours. It comes with a comprehensive accessory package including 145 pieces of 127×6000mm drill rods, along with 4‑ to 8‑stage hole openers, drill bits, and swivel.
2020 XZ320E HDD Rig
This is a 2020 XZ320E hdd rig with 1,750 working hours. It comes with 100 pieces of 76mm drill rods and 2,345 hole openers, drill bits, and swivel as accessories.